Made to measure. Order online. Delivered to your door.
Retractable awning measuring guide

How to Measure for a Retractable Awning

You need more than just wall width. Check the finished awning width, projection, mounting height, structure and clearances before ordering.

1. Measure the available width

Measure the clear horizontal span where the awning will mount. Allow for downpipes, lights, windows, doors, corners and other obstructions.

2. Choose the projection

Projection is how far the awning extends outward. Ellipse offers 1500–4000 mm projections; Fetuna offers 2000–4000 mm. Longer projections require sufficient awning width, and the calculators check the available combinations automatically.

3. Check mounting height and front clearance

The awning slopes downward as it projects outward, so confirm there is enough height to maintain usable headroom at the front bar.

4. Identify the mounting method

Wall face

Directly to suitable structure in the wall.

Soffit / undermount

Upward into suitable overhead structure.

Custom L-brackets

Used when the structural fixing is back at the soffit but the awning needs to sit forward, commonly to bring it to the gutter line.

5. Confirm real structure behind every bracket

Folding-arm awnings are heavy and transfer substantial loads into their mounting points. Fascia, cladding or soffit lining alone are not structural fixing points.

6. Check installation access

Allow room to lift the awning safely into position. Larger units usually need multiple people and appropriate access equipment.

Once you know the size

Enter the width, projection and mounting type online and let the calculator check the combination.

Choose an awning