Made to measure. Order online. Delivered to your door.
Measuring guide · Outdoor blinds

How to Measure for Outdoor Blinds

A practical checklist for getting your width and drop right before ordering a made-to-measure Omni outdoor blind.

Before you start

Use a steel tape measure, measure in millimetres, and write down the finished overall dimensions you intend to order. Measure the actual fixing points — not just the fabric area you want covered.

1. Decide whether you are face fitting or fitting inside an opening

Face fit means the blind sits over the front of the opening. This is often the easier option because the brackets and guides can overlap the opening.

Inside fit means the blind sits within the opening. This needs more accurate measurements and enough clearance for the hardware.

2. Measure the width in more than one place

Measure across the top, middle and bottom of the opening. Walls, posts and pergola framing are not always perfectly parallel. Use the measurement that is appropriate for your installation method and make sure the finished blind will clear any obstructions.

3. Measure the drop

For an inside fit, measure from the top fixing point to the finished bottom position. For a face fit, measure from the top of the blind position to where you want the blind to finish.

4. Allow for the blind hardware

The ordered width is the overall system width, not the PVC or mesh width by itself. On Omni systems the fabric is narrower than the overall width because space is taken up by brackets, end components and guides.

5. Check for obstructions

  • Door and window handles
  • Downpipes and gutters
  • Balustrades and handrails
  • Pergola brackets and post caps
  • Lights, switches and power outlets
  • Uneven paving or sloping floors

6. Measure twice before ordering

Every blind is made to your dimensions. Once manufacture starts, an incorrect customer-supplied measurement cannot simply be corrected by returning an off-the-shelf product.

Ready to build your blind?

Once you have the finished overall width and drop, enter them into the Omni configurator and choose your system, material and operation.

Build your Omni Outdoor Blind